Introduction of the Machine
Bottom housing of battery are fed by vibratory bowl feeder, after picking up and checking, battery negative roll tape cut off the battery negative and do assembly. Battery is vacuumed to the conveyor line, the battery positive roll tape cut off the feeding, assemble the top cover on the battery and the pressure head presses it down to fit on the battery tightly. The pin conducting needs to make sure the accuracy of test data. After welding the battery and anode, discharge the finished products.
Cycle time<=3S/PCS ；
Machine efficiency: 98% ；
Qualified product rate: 99% ；
Rejection rate of material less than 1% ；